Инструкция для Sony CDX-L490EE

Cautions

• This unit is designed for negative earth 12 V

DC operation only.

• Do not get the wires under a screw, or caught

in moving parts (e.g. seat railing).

• Before making connections, turn the car

ignition off to avoid short circuits.

• Connect the power connecting cord 

7

 to the

unit and speakers before connecting it to the
auxiliary power connector.

•

Run all earth wires to a common earth
point.

• Be sure to insulate any loose unconnected

wires with electrical tape for safety.

Notes on the power supply cord (yellow)

• When connecting this unit in combination with

other stereo components, the connected car
circuit’s rating must be higher than the sum of
each component’s fuse.

• When no car circuits are rated high enough,

connect the unit directly to the battery.

Parts Iist (

1

)

• The numbers in the list are keyed to those in

the instructions.

• The bracket 

1

 and the protection collar 

4

 are

attached to the unit before shipping. Before
mounting the unit, use the release keys 

6

 to

remove the bracket 

1

 and the protection collar

4

 from the unit. For details, see “Removing

the protection collar and the bracket (

4

)” on

the reverse side of the sheet.

•

Keep the release keys 

6

 for future use as

they are also necessary if you remove the
unit from your car.

Caution

Handle the bracket 

1

 carefully to avoid injuring

your fingers.

Note
Before installing, make sure that the catches on
both sides of the bracket 

1

 are bent inwards 2 mm.

If the catches are straight or bent outwards, the unit
will not be installed securely and may spring out.

Connection example (

2

)

Notes
• Be sure to connect the earth cord before

connecting the amplifier.

• If you connect an optional power amplifier and do

not use the built-in amplifier, the beep sound will
be deactivated.

Connection diagram (

3

)

A

To AMP REMOTE IN of an optional power
amplifier
This connection is only for amplifiers. Connecting
any other system may damage the unit.

B

To the interface cable of a car telephone

Warning

If you have a power aerial without a relay box,
connecting this unit with the supplied power
connecting cord 

7

 may damage the aerial.

Notes on the control leads
• The power aerial control lead (blue) supplies +12 V

DC when you turn on the tuner .

• When your car has built-in FM/AM aerial in the

rear/side glass, connect the power aerial control
lead (blue) or the accessory power input lead (red)
to the power terminal of the existing aerial
booster. For details, consult your dealer.

• A power aerial without a relay box cannot be used

with this unit.

Memory hold connection
When the yellow power input lead is connected,
power will always be supplied to the memory circuit
even when the ignition switch is turned off.

3-257-790-11

 

(1)

Installation/Connections

Установка/Подсоединение

FM

/

AM

Compact Disc
Player

CDX-L490EE

© 2003 Sony Corporation   

Printed in Thailand

1

2

×

 4

3

7

4

6

8

1

5

×

 2

Equipment used in illustrations (not supplied)

Аппаратура, фигурирующая в иллюстрациях (не прилагается)

Front speaker

Передний
громкоговоритель

Rear speaker

Задний
громкоговоритель

Power amplifier

Усилитель

AUDIO OUT REAR

2

1

Catch